EVA Film Used For Architectural Building Glass factory

Home Forums The FFSL Forum EVA Film Used For Architectural Building Glass factory

This topic contains 0 replies, has 1 voice, and was last updated by  Anonymous 9 months, 3 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #215

    Anonymous

    (1)We supply Extra clear EVA film with low haze . As we all know , transmittance and haze are two important factors to definite the transmittance properties of a transparent materials.
    Please see the index as below table.
    Transmittance>92%
    Haze< 0.3%
    Transmission – The amount of light that passes through the material without being scattered.
    Haze – The amount of light that is subject to Wide Angle Scattering.
    (2)Please see all the other performance index as below
    Transmittance> 92%
    Haze< 0.3%
    Cross-linking rate> 90%
    Adhesion with glass>100N/CM
    Tensile strength>22MPA
    UV filtering rate>99%
    (3)Processing :Temperature and time setting
    First section :60℃ 20mins
    Second section :130℃ 50mins
    (4)Size
    Thickness : 0.4mm ; 0.8mm
    Width : 2m , 2.2m, 2.3m ,2.4m
    Length : 100m , 50m
    Customized size is available for us .
    (5)Packing
    (6)MOQ
    1 roll is acceptable for us . What we suggest is that ordering one or two rolls at the first time for testing . For the following orders, one or a half container by sea would help to save much cost from your sides, that is also the way our current customers usually do .
    (7)Delivery time
    We have three EVA film production lines inside our factory. Daily output would be around 82800㎡. Generally , orders will be finished within 15 days.EVA Film Used For Architectural Building Glass factory
    website:http://www.ostereva.com/eva-film/eva-film-used-for-architectural-building-glass/

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.